Kabe Combi 12/18
The Kabe Combi 12/18 is a high-heel friendly mat, that can be rolled up, with black, grey or brown brush strip inserts, and is a lower version of the Kabe Combi with the height 12 or 18 mm. Other alternatives are with grey or black rubber strips or with ribbed textile strips. Kabe Combi 12/18 is available in the following alternatives: Kabe Combi Brush, Kabe Combi Textile and Kabe Combi Rubber.
The alternatives can also be combined with one another in the same mat. For Kabe Combi Textile, there are a large number of colour options. The Kabe Combi 12/18 is very suitable for use indoors and is a good alternative to the Kabe Original where it is not possible to prevent the passage of heavy trolleys.
TECHNICAL INFORMATION
WEIGHT
Kabe Combi 12 mm: 14 kg/m².
Kabe Combi: 18 mm: 16 kg/m².
MAT HEIGHT
Approximately 12 or 18 mm.
MAT SIZE
Custom-made. To cover larger areas, the mat is divided into suitably sized sections.
PROFILE SEPARATION
Standard separation between profiles approx. 5 mm.
ALUMINIUM PROFILES
Natural anodised aluminium alloy. Stainless steel wire, Ø 3 mm, jointing.
BRUSH STRIP
Black, grey, brown brush.
RUBBER STRIP
Black or grey.
TEXTILE STRIP
Black, red, sand, brown, grey, anthracite grey, ribbed textile strip.
INSTALLATION
Generally speaking, all types of mat should always be laid on a level, solid surface.
Install on level, solid surface recessed in the floor using kerb angle frame Kabe 12R, for mat height 12 mm, and Kabe 20R or Kabe 22R for mat height 18 mm.
Always state measurements A = width and B = length with specifications and when ordering.
For complete information about installation, see PDF under Documentation.
CARE
Vacuum, as a daily routine. Remove dirt that has collected by rolling up the mat at regular intervals. For large mats, roll the mat to halfway, from both directions.
Also, clean the top of the mat at regular intervals to remove any dirt that has fastened. It is best to rotate the mat by one half turn once a year, to spread the wear.
