Cantilevered, hot-dip galvanised, open, steel bottom frame for Kabe Original entrance mats. Used to obtain a self-cleaning function, where the dirt from the shoes falls through both the mat and the outlet grid, down into a deeper recess. In this way, the entrance mat becomes almost self-cleaning all year round.
The dirt collected only needs to be removed roughly 1-2 times a year, depending on the traffic intensity and the season. Kabe outlet grids are made of grating with a perforated plate welded on, which functions both as a level, stable surface that doesn’t damage the mat and as a flange to the support edge. Ferrules in deeper recesses should maintain an internal height of 25 mm to fit Kabe outlet grids combined with the Kabe Original entrance mat.
Kabe outlet grids are cantilevered up to max. 1200 mm. For dispersed load max. 500 kg/m².
Made to measure, max. for a single piece 1000 x 1260 mm (A x B).
To cover larger areas, the grid is divided into suitably sized sections.
Perforated plate SS 1142-32.
Hot-dip galvanised according to SS-EN-ISO 1461.
Mesh width 38 x 94 mm (free opening).
Twisted square bar 6 mm.
Flat bar 25 x 3 mm.
Round holes 15 mm with 20 mm spacing in triangular pattern.
Max. 1200 mm in the support direction.
The grid is made to order and is easily placed against the support edge in the recess.
For complete information about installation, see PDF under Documentation.
Kabe outlet grids do not need any special care.
Here, you can be inspired by some of our satisfied customers and experience the outlet grids in different surroundings.