Header Specialgaller

Kabex Special Grids

The Kabex Special Grid is a cantilevered, hardwearing, grid in hot-dip galvanised steel for external use. The scraper grid is high-heel friendly and suitable in all entrances where you want an almost self-servicing, dirt collection function in a deeper recess. During the winter, the Kabex Special Grid makes an especially good combination with the Kabe Original entrance mat. Kabex Special Grids are also available with ribbed rubber scraper and anti-slip strips for improved dirt removal and protection against slipping.

The grid is manufactured 25 mm high as standard, but it can be supplied in heights 25-50 mm in 5 mm intervals. It can also be provided with adjustable support legs, 135-235 mm vertical height from ground to top edge of the grid. Kabex Special Grids can support loads up to 500 kg/m².

TECHNICAL INFORMATION

WEIGHT

Approximately 22 kg/m² (height 25 mm) for grid with steel profile.
Approximately 24 kg/m² (height 25 mm) for grid with rubber profile.

GRID HEIGHT

20 to 50 mm at intervals of 5 mm.

GRID SIZE

Made to measure, max. 1480 x 1000 mm (A x B) in one piece. To cover larger areas, the grid is divided into suitably sized sections. Standard size 25 mm is kept in stock, matching the stock kerb angle frames Kabe 25RS.

For quicker delivery, it can be a good idea for larger areas to try combining a number of stocked standard grids.

MESH WIDTH

43 x 5 mm (free opening).

SPAN

Max. 800 mm in the B-direction (height 25 mm).

FREE AREA

50%.

LOAD-BEARING STEEL

Flat bar 25 x 3 mm in the B-direction.

SCRAPER STRIP

In punched steel profiles or, alternatively, with
rubber scrapper strip for reduced risk of slipping.

ROUND BAR

4 mm.

SURFACE TREATMENT

Hot-dip galvanised according to SS-EN-ISO 1461.

STOCKED STANDARD DIMENSIONS AxB (mm)

790 x 490 mm
790 x 590 mm
990 x 790 mm
990 x 490 mm
990 x 590 mm

INSTALLATION

Alternative 1: Install on level, solid surface recessed in the floor using kerb angle frame Kabe 25R or on the floor in Kabe mat ramp, type 2. EM-grids are only to be installed recessed in the floor with the kerb angle frame Kabe 25R.

Alternative 2: Installed cantilevered over deeper recess using kerb angle frame Kabe 25R.


Always state measurements A = width and B = length with specifications and when ordering.

CARE

Lift up the grid and remove the dirt when required. The grid does not need any care.

INSPIRATION

Here, you can be inspired by some of our satisfied customers and experience the Kabex Special Grids in different surroundings.

MODELS

Kabex Special grids is available in two different models: Kabex Special grids and Kabex Special grids with Scraper strip. Do you need help choosing? Contact Kåbe-Mattan, and we’ll guide you right!

Specialgaller 460x320px

KABEX SPECIAL GRIDS

Specialgaller gummi 460x320px

KABEX SPECIAL GRIDS WITH SCRAPER STRIP

DOCUMENTATION & BROCHURES

PRODUCT SHEET

KBM Specialgaller en

CATALOGUE

produktkatalog