Header Kombimatta

KABE COMBI MAT

The Kabe Combi is a high-heel friendly, hardwearing combination mat, which can be rolled up, with black, grey or red brushes. The Combi entrance mat is an excellent alternative to the Kabe Original for environments heavily trafficked, for example, by shopping trolleys. The brushes can be replaced by, or combined with, textile and rubber strips. The underside is provided with rubber strips to keep the mat stationary on the surface and dampen the sound of footsteps. Kabe Combi is just as suitable for indoor as for outdoor use.

Kabe Combi is available in the following alternatives: Kabe Combi Brush, Kabe Combi Textile and Kabe Combi Rubber. The alternatives can also be combined with one another in the same mat, if so wanted. Contact us for more information!

TECHNICAL INFORMATION

WEIGHT

Approx. 16 kg/m².

MAT HEIGHT

Standard 24 mm. Also available in the heights 12 and 18 mm.

MAT SIZE

Made to measure, max. for a single piece 2000 x 1500 (A x B). To cover larger areas, the mat is divided into suitably sized sections.

PROFILE SEPARATION

Standard distance between profiles, max. 4 mm.

ALUMINIUM PROFILES

Natural anodised aluminium alloy, EN
AW-6063-T6. Also available in black or
gold anodised versions. Stainless steel
wire Ø 2.3 mm, jointing.

BRUSH STRIP

Bristle-fused strips, bristles symmetrically distributed in dense groups that are fused to the plastic strip. The bristle strips are held in place by rubber end stops. Damaged bristle strips can be replaced easily. Available with brushes in black, light-grey, dark-grey and red.

RUBBER STRIP

Black ribbed rubber strip.

TEXTILE STRIP

Coral Classic or Coral Brush.

ENVIRONMENT

Declared in Byggvarubedömningen, Sunda Hus.

EN 16005:2012

Complies with the requirements in EN16005:2012.
The mats follow the underlying surface and the mats are
laid with millimetre alignment, edge to edge.

INSTALLATION

Generally speaking, all types of mat should always be laid on a level, solid surface.

Install on level, solid surface recessed in the floor using kerb angle frame Kabe 12R, for mat height 12 mm, and Kabe 20R or Kabe 22R for mat height 18 mm.

Always state measurements A = width and B = length with specifications and when ordering.

For complete information about installation, see PDF under Documentation.

CARE

Vacuum, as a daily routine. Remove dirt that has collected by rolling up the mat at regular intervals. For large mats, roll the mat to halfway, from both directions.

Also, clean the top of the mat at regular intervals to remove any dirt that has fastened. It is best to rotate the mat by one half turn once a year, to spread the wear.

INSPIRATION

Here, you can be inspired by some of our satisfied customers and experience the Kabe Combi entrance mat in different surroundings.

MODELS

Kabe Combi is available in several different models: Kabe Combi Brush, Kabe Combi Textile and Kabe Combi Rubber. The three models can also be combined with one another in the same mat. Do you need help choosing? Contact Kåbe-Mattan, and we’ll guide you right!

Kombi borst 460x320px

KABE COMBI BRUSH

Kombi textil 460x320px

KABE COMBI TEXTILE

Kombi gummi 460x320px

KABE COMBI RUBBER

DOCUMENTATION & BROCHURES

INSTALLATION

KBM Installation Kombimattan

PRODUCT SHEET

KBM Kombi

CATALOGUE

produktkatalog