Kabe Original Entrance Mat
Kabe Original, with its classic wavy rubber strips and aluminium frame, is the most effective entrance mat on the market. The Kabe Original is a combination of scraper grid and doormat for use indoors and out. The classic way rubber curves are easily bent by the pressure from your feet as you cross the entrance mat and spring back with force when the pressure is released. This means that grit, sand, dirt and water are wiped off the shoes, just by walking across the entrance mat. Simple and efficient – without any need to wipe your feet!
The entrance mat can be rolled up, handmade in Sweden for the last 75 years and has a 10-year guarantee. Moreover, the mat is 100% recyclable – our way of contributing to a more sustainable world. The Kabe Original can be made in rectangular, round or other irregular shapes. Contact us and we will help you!
Approx. 12 kg/m².
Standard 22 mm or 18 mm for existing recesses with heights 15-19 mm.
The Kabe Original is made to measure in any size. Max. size of a single piece 2000 x 5000 mm (A x B). To cover larger areas, the mat is divided into suitably sized sections. We manufacture mats in almost any shape. Provide us with a drawing or template. Under 400 mm for A-dimension, there is an additional set-up cost.
Kabe Original is 100% recyclable.
Aluminium alloy, EN AW-6005-A-T6.
Dimensions: 12 x 4.5 mm.
Kabe-mattan offers downloadable drawing materials through BIMObject that simplify design work. Via this link there is information for Kabe Original Entrance Mat.
A composition that is especially resistant to extreme temperature variations, EPDM 70° Shore. Dimensions 22 x 3.7 mm.
U 18 x 18 x 2 mm.
The rubber strips and aluminium bars are riveted together with special rivets. The mat is held together by Ø 2.3 mm stainless steel wire.
Kabe Original entrance mats are reinforced with rubber bushes.
Kabe Original entrance mats come in natural aluminium as standard but can also be provided in black or gold anodised aluminium.
The Kabe Original entrance mat is declared in Byggvarubedömningen, Sunda Hus.
Kabe Original entrance mats comply with the requirements in EN 16005:2012.
Generally speaking, all types of mat should always be laid on a level, solid surface.
Install on level, solid surface recessed in the floor using kerb angle frame Kabe 20R or, alternatively Kabe 22R, or on-floor in Kabe mat ramp, type 2. Always state measurements A = width and B = length with specifications and when ordering.
The mat is designed with identical surfaces and should be reversed at least once a year, for maximum service life. To clean Kabe Original entrance mats, do not use chemicals – only water.
For more information about installation and care, see PDF under Documentation.
Here, you can be inspired by some of our satisfied customers and experience the Kabe Original entrance mat in different surroundings.
Tailor-make your entrance mat with our various accessories. Kåbe-Mattan helps you to find the right solution that is suited to your needs and wishes.
Choose between several surface treatments to give your Kabe Original its own character.
1. Natural aluminium
2. Gold anodised
3. Black anodised
Create guide paths and creative patterns in Kabe Original entrance mats using tactile inserts, which are available in white and fluorescent green. The inserts fasten easily in the mat.
The reinforced version of the Kabe Original entrance mat is recommended if the mat is to be placed in environments where there is wheeled traffic or sloping floors combined with studs in the substrate. The reinforcement consists of rubber bushes that are threaded on the steel wires.
We know that no entrance is the same. For this reason, Kåbe-Mattan offers several different models of our famous entrance mat – so you can find the right solution for your needs. Discover our Original entrance mats here!