Kabe EM-Grid
The Kabe EM-Grid is an entrance grid for small entrances or premises with requirements for good scraping ability and large permeability. The grid is hot-dip galvanised and is suitable for environments where users wipe their feet. Kabe EM-Grids are not cantilevered and must be placed on a level, solid surface.
TECHNICAL INFORMATION
WEIGHT
Approx. 16 kg/m².
GRID HEIGHT
25 to 50 mm at intervals of 5 mm.
GRID SIZE
Made to measure, max. size for a single piece 1000 x 800 mm
(A x B). Standard sizes are kept in stock,
matching the stock kerb angle frames
Kabe 25RS.
MESH WIDTH
35 x 12 mm (free opening).
FREE AREA
60%.
LOAD-BEARING STEEL
Flat bar 25 x 2 mm in the B-direction.
EDGE STEEL
Flat bar 25 x 2 mm.
SURFACE TREATMENT
Hot-dip galvanised according to SS-EN-ISO 1461.
INSTALLATION
Install on level, solid surface recessed in the floor using kerb angle frame Kabe 25R.
CARE
Lift up the grid and remove the dirt when required. The grid does not need any care.
STOCKED STANDARD DIMENSIONS AxB (mm)
590 x 290 mm
590 x 390 mm
790 x 490 mm
INSPIRATION
Here, you can be inspired by some of our satisfied customers and experience the Kabe EM-Grids in different surroundings.
