Ramp Frames
Kabe ramp frames consist of angled strips, in natural-colour light metal, and are intended for on-floor entrance mats. The ramp frames are used to prevent the risk of tripping and they protect the mat’s edges. The ramp frames are available in two types – type 1 and type 2. The type 1 Kabe Ramp Frame is used for on-floor mats and can only be installed on the front and/or back edge of the Kabe Original entrance mat. It is an excellent choice in entrances where you want to improve the wipe function but do not have the possibility to make a recess in the floor.
The type 2 Kabe ramp frame is used for on-floor mats or scraper grids and suits all mats or grids with heights 20-22 mm. The type 2 Kabe ramp frame is laid directly on the floor and can be made multi-sided, depending on the conditions. The ramp is provided with rubber strips underneath, so it lies stationary and dirt and water are held in place. The ramp can be fastened to the floor, if this is possible.
TECHNICAL INFORMATION
WEIGHT
Type 1: 0.48 kg/m.
Type 2: 0.61 kg/m.
RAMP SIZE
Made to measure, max. profile length is one piece, 5000 mm.
ALUMINIUM
Natural aluminium alloy EN AW 6063-T6.
CORNER FITTING
Stainless steel sheet SS 2343.
SURFACE TREATMENT
Natural, gold and black anodised.
CARE
Kabe ramp frames do not need any special care.
INSTALLATION
Type 1: The ramp is delivered from the factory assembled on the mat and doesn’t need any installation.
Type 2: Kabe ramp fra,e type 2 is delivered in made to measure loose lengths with corners cut to 45 degrees (for rectangular mats) and loose corner fittings. Knock the corner irons into the end of two equally long ramps with a rubber mallet. Connect both of the other ramps to one of the equally long ramps and knock together with the rubber mallet. Finish, by knocking the last ramp into place.
For more information about installation, see PDF under Documentation.
INSPIRATION
Here, you can be inspired by some of our satisfied customers and experience the ramp frames in different surroundings.
