Stainless Steel Outlet Drains
Acid-proof stainless steel with clasps. The Kåbe stainless steel SS 2343 outlet drain is cast in place beneath Kåbe Original and is connected to a water drainage pipe. The outlet drain is available in two models, 600 S and 600 VLS, in standard sizes. 600 S with filter and sleeve for side connection and 600 VLS with filter, sleeve for side connection, and water trap.
TECHNICAL INFORMATION
MATERIAL
Made from acid-proof stainless steel SS 2343, except the filter, which is made from hot-dip galvanised expanded metal.
INSTALLATION
The lateral and depth position of the outlet drain is determined by the location of the waste pipe. The top edge of the outlet drain must be level with the top edge of the lower flange of the casting frame = the bottom edge of the mat. The outlet drain is fitted with clasps that can be turned in the direction required during the casting process.
The concrete must not be poured against the outlet drain. Doing so can damage the mat, which requires a firm and flat base.
CARE
Kåbe outlet drains are virtually maintenance-free. The only thing you need to do is clean the filter when needed.
For more information about installation and care, see the PDF file under Documentation.
